Find what you are looking for!
Newest items will appear at the top of this listing. Please note, all prices are in USD. Shipping costs, if listed, are estimates only.
These trim pieces are placed on the front seat headrest. One of the mounting clips is broken and will need to be mended. The chrome is in great condition.
Used in the controling the air flow from the air conditioning unit. In great condition for it's age. Table 32, Fig 18, 19.
A used stud from a Sebring. Used to mount the starter motor. Stands 50 mm tall and 11.5 mm wide. Table 9 Fig 119.
A pair of used Maserati Ghibli front wheel seal caps. Refer to Spare Parts Book: Table 25 Figure 49.
Brand new temperature sensor for a 3500GT. It is in excellent condition.
Used driveshaft packer. Measure 114mm in diameter. No damage. In good condition.
Beautifully made ashtray from a Maserati Allemano. It is in excellent condition.
Aluminimum cast of a front grill trident and surround. Will need to be wet sanded to a finish product. 200mm tall.
Two excellent condition rubber fuel tank grommets. These fit around the neck of the tank, making a seal around the neck to the bodywork.
Internal handbrake assembly and rods. It has been restored and is in excellent condition. Spare Parts Table 15.
Bonnet spring and striking plate for the bonnet or hood. Comes with the three screws to attach the plate to the front chassis.
Door switch for interior light. One of the connector tabs is missing and would need to be replaced.
Are you missing an ashtray in your QPI? Well here is what you have been looking for. Needs a clean. Wood in good condition.
Trim from the bonnet of a QPI. The trim will need to be repaired as one of the mounting bolts is damaged.
Four used door pins. Used in many Maserati model cars. These ar ein good condition.
Brand new pair of bonnet grommets. Comes in a set of two. These are in brand new condition.
A set of new header gaskets with their washer and hard to get copper nuts. All items are in excellent condition.
A single hexagonal head nut. This from a Maserati 3500GT. It is good condition. Overall Diameter: 18mm
A used Maserati alternator bracket arm. It is in good conditional and made from steel. Overall length is 190mm. Spacing between mounting holes is 175mm.
Four used Maserati seat packers. These are used for raising the height of the drivers or passengers’ seat. Used on many European cars from the 1960’s and 1970’s. These are in good condition.
Four used Maserati studs, used to fix the brake and clutch. They are in good condition. These measure: 32 mm x 8.5 mm.
A pair of Maserati 3500GT door locks. They are in good condition and come as shown in the photos.
A used Maserati sump hose holder. It fit in front of the sump and supports the host going through the chassis frame. It is in good condition. Internal dimension: 36mm
A pair of used and flexible hydraulic hose support. Comes complete with rubber inserts. As used in many Maserati cars. These are in excellent condition.
This is for the front windshield of our Maserati Quattroporte I. It is complete and in one piece. Shipping to be organised and paid for by the buyer.
For sale is the complete rear window from Maserati Quattroporte I. Excellent condition. Shipping to be organised and paid for by the buyer.
A selection of Maserati Quattroporte III door window glass. We have a number of them available. Please get in contact with us and we can provide more detail and individual photos. Shipping cost to be organised by buyer.
It comes complete with the heating wires in the glass. It is in excellent condition as is the glass edging.
Dimensions of the glass is: 1105mm x 910mm. Thickness of 3 to 4 mm. Estimated weight of the window is 9.0 kg.
Packing, insurance and shipping to be organised and paid for by purchaser.
Here are two aluminium floor pans from an Maserati Allemano. These are in excellent condition for their age. We can combine shipping with other items.
This item is from a Maserati Allemano. It is an original aluminium firewall from one of twenty one cars made. Also available are the aluminium flooring from the same car.
Complete rear trim or a Maserati Mistral. It goes holds the rubber in place to make it water tight. It is in two pieces and is in good condition. Please ask for shipping costs.
One used Hella rear license plate light as fitted to some vintage Maserati and other European cars. Made in Germany.
Lens marked with: K12844 A 2236 and also 1372LT.
A used Hella rear license plate number light. As fitted to some early model Maserati and other European cars. Please note that the clear Perspex is cracked.
This is a Maserati 3500GT high tension lead carrier. This is a polished stainless-steel version for original carburetted Maserati cars. Refer to Spare Parts Book, Table 9 Figure 72.
This is for a restored Maserati Quattroporte Series I internal vent fan unit. It has been refurbished and is ready to install. It is in excellent condition. Please note this is a large and heavy item.
This is for a pair of used Girling disc brakes calipers. These have been restored but are not complete. The British Girling units are common in sports cars of the 1960's. Casting numbers are 64325109 (left) and 64325110 (right). The distance between the mounting bolts is 78.74mm (3.1 inches). The diameter of the holes is: 11mm. These are very heavy, once packaged they weigh 14.5 kg.
This is for a pair of Maserati trunk hinges. It includes everything you need to install on your Maserati Quattroporte. These are in good condition.
This is a used and original Ducellier fan motor and associated Moplen 9 bladed fan. Removed from a QPI but would fit other Maserati and European cars of the era. In working condition. Motor part number: 4921A. Made in France.
Ghibli interior gear plate. Cleaned and ready to be installed. Leather in good condition. Comes with mounting screws.
Overall length 14 cm.
Used, but in great condition, Maserati ashtray. From an older model Maserati Quattroporte. Ready to be go. Mounting width: 4 inches
This unit from a Maserati has been fully refurbished and chrome plated. It is ready to be installed.
This is for a pair of Maserati rear scripts. As you can see it has been fully restored and are in excellent condition.
These measure 212 mm long. The spacing between the mounting holes are 150 mm.
Here is a brand new and sealed Maserati speedometer cable.
Purchased from MIE Corporation but never used. Comes with original sales receipt.
This is a used and in good condition Maserati bonnet / trunk opener. It comes off the old models and has all the fixing that is required. These are hard to find and always sell well.
Fantastic condition sliding vent control. These would be used to adjust the amount of air in the cabin.
Maserati circular air vent. It will fit an 80mm insert. These are used on many of the early model Maserati cars including the Maserati Ghibli as shown in the spare parts manual. Table 41 Figure 1.
We have a number of these available.
Message us for quotes on shipping.
The Maserati Classic Collection is a small private garage dedicated to restoring Maserati automobiles and Italian motorbikes. It is in Auckland, New Zealand and run by a few antiquated members.
We are clearing out the garage. We have finished restoring our cars and now we need some room for the motorbikes. Maserati parts are new and used. We have car parts from several different models. They are sitting on the shelves waiting for the right project.
We have items on eBay too. Parts on this site will be cheap that the eBay store. Contact us to ensure that you have the right part for your car.
All prices listed on this website are in United States Dollars (USD).
We prefer to use Wise.com for payments. We will send you the details of our United States bank account.
Wise is quicker, cheaper and easier to use. It also has better rates than PayPal. Compare PayPal vs Wises.
If you prefer to use PayPal, we can accommodate you.
Invoices will be provided with all purchases.
Please contact us regarding your shipping requirements. We are happy to combine items to keep the cost down.
We use New Zealand Post for shipping internationally. Options include economy, courier or express.
You will receive a tracking number with your purchase.
If you would prefer to use your own shipping company, we can help make this happen.
If you have purchased any items from us and you are in New Zealand, please get in contact and we can show you around the garage.
Auckland, New Zealand